ZG-JSLA+LF24-SR-S US Jackshaft Linkage for 1/2" to 1.05" Shafts

ZG-JSLA+LF24-SR-S US Jackshaft linkage for 1/2" to 1.05" shafts

Design Data : Design Data

• Options
• Details
• Downloads
• Accessories

Shaft extension 170 mm ø10 mm for damper shaft ø6...16 mm

Shaft clamp reversible, clamping range ø5/8...3/4" [16...20 mm]

Ball joint suitable for damper crank arm KH8 / KH10

Ball joint suitable for damper crank arm KH8

Ball joint suitable for damper crank arm KH8

Actuator arm, clamping range ø3/8...5/8" [8...16 mm], Slot width 8.2 mm

Damper crank arm Slot width 8.2 mm, for ø1.05"

Damper crank arm Slot width 8.2 mm, clamping range ø3/8...3/4" [10...18 mm]

Push rod for KG10A ball joint (36” L, 3/8” diameter).

Push rod for KG6 & KG8 ball joints (36” L, 5/16” diameter).

Wrench 0.32 in and 0.39 in [8 mm and 10 mm]

Angle of rotation limiter, with end stop

LF right angle bracket 4-1/2x5-1/2x2-1/2" (HxWxD).

Conduit box converter
Electrical junction box

Damper clip for damper blade, 3.5” width.

Linkage kit, Jackshaft RetroFIT+ Linkage with Belimo Rotary Actuators

LF crankarm adaptor kit (includes ZG-112).

LF crankarm adaptor kit (T bracket included).

Shaft extension for 3/8" diameter shafts (4" L).

Shaft extension for 1/2" diameter shafts (5" L).

Resistor, to convert a 4...20 mA signal into a 2...10 V control signal

Weather shield, 13x8x6" [330x203x152 mm] (LxWxH)

Weather shield, 406x213x102 mm [16x8-3/8x4"] (LxWxH)

Explosion proof housing, 16x10x6.435" [406x254x164 mm] (LxWxH), for NK.. / GM.. / GK.. / AM.. / LF.. / AF.. / NF.. / FS..F.. Series Actuators

Weather shield, 17-1/4x8-3/4x5-1/2" [438x222x140 mm] (LxWxH)

Weather shield, 17-1/4x8-3/4x5-1/2" [438x222x140 mm] (LxWxH)

Signal simulator, designed to operate most modulating, floating point and on/off style actuators without the presence of a controller

Auxiliary switch, for 1/2" diameter shafts mount

Auxiliary switch, for 1" diameter shafts mount