ZG-JSLA+AFXUP-S Jackshaft Linkage for 1/2" to 1.05" Shafts

ZG-JSLA+AFXUP-S Jackshaft linkage for 1/2" to 1.05" shafts

Design Data : Design Data

• Options
• Details
• Downloads
• Accessories

Shaft extension 240 mm ø20 mm for damper shaft ø8...22.7 mm

Shaft clamp reversible, for central mounting, for damper shafts ø12.7 / 19.0 / 25.4 mm

Ball joint suitable for damper crank arm KH8 / KH10

Ball joint suitable for damper crank arm KH8

Actuator arm, for 3/4" shafts, clamping range ø3/8...7/8" [10...22 mm], Slot width 8.2 mm

Damper crank arm Slot width 8.2 mm, clamping range ø1/2...1" [14...25 mm]

Damper crank arm Slot width 8.2 mm, for ø1.05"

Damper crank arm Slot width 8.2 mm, clamping range ø3/8...3/4" [10...18 mm]

Push rod for KG10A ball joint (36” L, 3/8” diameter).

Push rod for KG6 & KG8 ball joints (36” L, 5/16” diameter).

Wrench 0.32 in and 0.39 in [8 mm and 10 mm]

Baseplate extension, for NFB(X) / AFB(X)

Baseplate extension, for NFB(X) / AFB(X)

Mounting kit for linkage operation for flat and side installation

Mounting kit, for foot mount installation

Damper clip for damper blade, 3.5” width.

1-5/16" diameter jackshaft adaptor (12" L).

1.05" diameter jackshaft adaptor (12" L).

Linkage kit, Jackshaft RetroFIT+ Linkage with Belimo Rotary Actuators

Weather shield, 13x8x6" [330x203x152 mm] (LxWxH)

Weather shield, 406x213x102 mm [16x8-3/8x4"] (LxWxH)

Explosion proof housing, 16x10x6.435" [406x254x164 mm] (LxWxH), for NK.. / GM.. / GK.. / AM.. / LF.. / AF.. / NF.. / FS..F.. Series Actuators

Weather shield, 17-1/4x8-3/4x5-1/2" [438x222x140 mm] (LxWxH)

Weather shield, 17-1/4x8-3/4x5-1/2" [438x222x140 mm] (LxWxH)

Signal simulator, designed to operate most modulating, floating point and on/off style actuators without the presence of a controller

Auxiliary switch, for 1/2" diameter shafts mount

Auxiliary switch, for 1" diameter shafts mount