LMB24-MFT 45 in-lb Non-Spring Return Damper Actuator

LMB24-MFT Damper actuators, 45 in-lbs [5 Nm], Non fail-safe, AC/DC24V, DC2...10V

Damper Actuator, 45 in-lb [5 Nm], Non fail-safe, AC/DC 24 V, MFT/programmable, 2...10 V

Design Data : Design Data

• Details
• Downloads
• Accessories

Shaft extension 170 mm ø10 mm for damper shaft ø6...16 mm

Shaft extension 240 mm ø20 mm for damper shaft ø8...22.7 mm

Ball joint suitable for damper crank arm KH8 / KH10

Ball joint suitable for damper crank arm KH8

Ball joint suitable for damper crank arm KH8

Damper crank arm Slot width 8.2 mm, clamping range ø1/2...1" [14...25 mm]

Damper crank arm Slot width 8.2 mm, for ø1.05"

Damper crank arm Slot width 8.2 mm, clamping range ø3/8...3/4" [10...18 mm]

Push rod for KG10A ball joint (36” L, 3/8” diameter).

Push rod for KG6 & KG8 ball joints (36” L, 5/16” diameter).

Wrench 0.32 in and 0.39 in [8 mm and 10 mm]

Damper clip for damper blade, 3.5” width.

Shaft extension for 1/2" diameter shafts (3" L).

Shaft extension for 3/8" diameter shafts (4" L).

Shaft extension for 1/2" diameter shafts (5" L).

Resistor, to convert a 4...20 mA signal into a 2...10 V control signal

Weather shield, 13x8x6" [330x203x152 mm] (LxWxH)

Weather shield, 406x213x102 mm [16x8-3/8x4"] (LxWxH)

Terminal-strip cover for NEMA 2 rating (-T models).

Feedback potentiometer 10 kΩ add-on, grey

Feedback potentiometer 1 kΩ add-on, grey

Feedback potentiometer 140 Ω add-on, grey

Signal simulator, designed to operate most modulating, floating point and on/off style actuators without the presence of a controller

Connecting cable 16 ft [5 m], A: RJ11 6/4 LINK.10, B: 6-pin for connection to service socket

Connecting cable 10 ft [3 m], A: RJ11 6/4 LINK.10, B: 3-pin Weidmüller and supply connection

Auxiliary switch, for 1/2" diameter shafts mount

Auxiliary switch, for 1" diameter shafts mount