FS-EZ2-MBUS-MD-BAC EZ Gateway MBUS-Modbus-BACnet 32 Slaves

With the FS-EZ2-MBUS-MD-BAC EZ Gateway M-Bus to Modbus & BACnet, the integrator or contractor does not need to be a protocol expert, and can minimize configuration and commissioning time, while also reducing ongoing operating and maintenance costs. The FS-EZ2-MBUS-MD-BAC EZ Gateway M-Bus to Modbus & BACnet combines field-hardened M-Bus, Modbus and BACnet protocol drivers with an easy to use configuration interface that, once configured, allows M-Bus devices to be presented as virtual BACnet devices which simplifies commissioning, configuration and troubleshooting. The intuitive web-based interface allows configurations to be built in the field or in the office. Additionally, the configuration profiles can be downloaded and then uploaded to other FieldServer M-Bus applications, simplifying the commissioning and integration process on repeatable applications. 1. M-BUS INTEROPERABILITY

• M-Bus Explorer discovers all M-Bus devices in the network, shows the manufacturer details as well as available points, and offers one-click profile generation
• Profile Loader enables efficient profile editing, exporting and importing
• Communication between devices with different baud rates at the same time
• Virtual nodes allow each M-Bus device connected to a single EZ Gateway to be seen as a separate device on the BACnet network

• Use the Change of Value (CoV) setting to reduce the amount of BACnet data overhead to allow network traffic to be less congested by transmitting data only when detecting an M-Bus device status change

• All FieldServer gateways come with Remote Access support. Once registerd to the MSA Grid, use the Remote Access capability to attach to the FieldServer gateway to monitor, maintain and troubleshoot installed equipment

• For connecting to remote BACnet networks

• Diagnostics of the devices connected to the network is available via Web Interface

• Register your EZ Gateway to the MSA Grid interface for remote access to local applications, configuration, and device management

Power Requirements

• 9-30V DC or 12-24V AC
• Current draw @ 12V:
  • 1 Slave: 580 mA
  • 64 Slaves: 980 mA

Enclosure

• Dimensions: 4.5 x 2.9 x 1.6 in. (11.5 x 7.4 x 4.1 cm)
• Weight: 0.4 lbs (0.2 Kg)

Environmental

• Operating Temperature: -40 to 75C (-40 to 167F))
• Relative Humidity: 5-90% non-condensing

Other

• Configuration/Diagnostic utilities
• Table, wall, or DIN rail mount

Communication

• Baud: 2400, 4800, 9600, 19200, 38400
• Start Bit: 7, 8
• Ethernet: 10/100 BaseT MDIX

• Datasheet (PDF)
• Start-Up Guide (PDF)