FR-20 Free-Topology Repeater

The Smart Controls FR-20 is a two (2) channel physical layer repeater that cost-effectively extends the limits of a free topology LonWorks^® network. The FR-20 provides electrical isolation between LON network channels to extend the maximum length of the channel and to increase the maximum number nodes on that channel. The FR-10 requires no software configuration and there are no jumpers to be set. DIN Rail mounting and screw plugs allow fast and easy installation in to existing or new LonWorks^® networks. A nominal 24 Volt AC/DC power source is used to power the FR-20.

Specifications

General

Communications: Echelon® FTT-10A Voltage Input: 12-28 VAC or 9-38 VDC Power Consumption: maximum 2.0 VA Operating Temperature: -20 to 70C (-4 to 158 F) Humidity: 5 to 95% R.H. (non-condensing) Physical Dimensions: L 35mm x W 113mm x H 58mm, (1.38” x 4.44” x 2.28”) with plugs connected Weight: 57 grams (2 oz.) Wire Type: AWG 22 to AWG 16 (copper conductors only) Mounting: 35mm DIN-rail EMI: CE Approved