AMB24-MFT 180 in-lb Non-Spring Return Damper Actuator

AMB24-MFT Damper actuators, 180 in-lbs [20 Nm], Non fail-safe, AC/DC24V, DC2...10V

Damper Actuator, 180 in-lb [20 Nm], Non fail-safe, AC/DC 24 V, MFT/programmable, 2...10 V

Design Data : Design Data

• Details
• Downloads
• Accessories

Actuator arm for standard shaft clamp (one-sided)

Shaft extension 240 mm ø20 mm for damper shaft ø8...22.7 mm

Shaft clamp reversible for SM..A, NKQ..A, NMQ..A, clamping range ø3/8...3/4" [10...20 mm]

Ball joint suitable for damper crank arm KH8 / KH10

Ball joint suitable for damper crank arm KH8

Ball joint suitable for damper crank arm KH8

Damper crank arm Slot width 8.2 mm, clamping range ø1/2...1" [14...25 mm]

Damper crank arm Slot width 8.2 mm, for ø1.05"

Damper crank arm Slot width 8.2 mm, clamping range ø3/8...3/4" [10...18 mm]

Push rod for KG10A ball joint (36” L, 3/8” diameter).

Push rod for KG6 & KG8 ball joints (36” L, 5/16” diameter).

Wrench 0.32 in and 0.39 in [8 mm and 10 mm]

Baseplate extension for SM..A to SM../AM../SMD24R

LF right angle bracket 4-1/2x5-1/2x2-1/2" (HxWxD).

Damper clip for damper blade, 3.5” width.

1-5/16" diameter jackshaft adaptor (12" L).

1.05" diameter jackshaft adaptor (12" L).

Linkage kit, Jackshaft RetroFIT+ Linkage with Belimo Rotary Actuators

Mounting kit for linkage operation for flat installation

Resistor, to convert a 4...20 mA signal into a 2...10 V control signal

Weather shield, 13x8x6" [330x203x152 mm] (LxWxH)

Weather shield, 406x213x102 mm [16x8-3/8x4"] (LxWxH)

Explosion proof housing, 16x10x6.435" [406x254x164 mm] (LxWxH), for NK.. / GM.. / GK.. / AM.. / LF.. / AF.. / NF.. / FS..F.. Series Actuators

Weather shield, 17-1/4x8-3/4x5-1/2" [438x222x140 mm] (LxWxH)

Weather shield, 17-1/4x8-3/4x5-1/2" [438x222x140 mm] (LxWxH)

Terminal-strip cover for NEMA 2 rating (-T models).

Feedback potentiometer 10 kΩ add-on, grey

Feedback potentiometer 1 kΩ add-on, grey

Feedback potentiometer 140 Ω add-on, grey

Signal simulator, designed to operate most modulating, floating point and on/off style actuators without the presence of a controller

Connecting cable 16 ft [5 m], A: RJ11 6/4 LINK.10, B: 6-pin for connection to service socket

Connecting cable 10 ft [3 m], A: RJ11 6/4 LINK.10, B: 3-pin Weidmüller and supply connection

Auxiliary switch, for 1/2" diameter shafts mount

Auxiliary switch, for 1" diameter shafts mount