{"product_id":"sc100-mp-multi-protocol-controller","title":"SC100-MP Multi-Protocol Controller","description":"The Smart I\/O™ SC100-MP breaks the multi-protocol communication barrier by providing NATIVE BACnet, and LonTalk communication all in one controller. BACnet can communicate over an RS-485 communication channel while BACnet\/Free Topology and LonTalk\/FT (Free Topology) are communicating over a TP\/FT-10 communication channel simultaneously to provide monitoring, control and diagnostic information.\n\nIn addition, the SC100-MP has the capability to communicate BACnet\/IP or LonTalk\/IP in a manner that is transparent to both the application and FT network. With BACnet\/IP, applications on the SC100-MP run unmodified over a very reliable Free Topology channel delivering BACnet Objects. With LonTalk\/IP, applications on the SC100-MP run unmodified over the same reliable Free Topology channel delivering network and configuration variables. The IP address is established at the device level. The SC100-MP is fully compatible and discoverable using industry-standard, BTL certified, BACnet management clients and LONWORKS® network management software.\n\nThe SC100-MP is a fully programmable controller allowing a complete sequence of customized operations for today’s ever-changing control strategies that are required to meet continued energy efficiency requirements. The reliable cost-effective I\/O is continuously monitored and precisely controlled by an on-board 32-bit microprocessor.\n\nThe controller features an additional local serial communication to a Smart Controls SI-20 remote room sensor interface. The SI-20 features a fully programmable display for unprecedented custom application functionality.\n\nAs an option, a precision airflow sensor can be added that provides reliable and accurate measurements expanding the superior performance of the SC160-MP for Pressure Independent VAV applications or static pressure applications under 2 inches WC (0-500 Pa).\n\nThe five universal inputs (UI) can be software selected to sense analog or digital signals. There are no jumper adjustments or settings on the SC100-MP. Inputs are automatically set-up in the application program that is downloaded into the controller. Universal inputs 1 through 5 will monitor an analog signal from resistive (10K ohm Type 2, 3 or 20K ohm) sensors or voltages (0-5V) from a transducer accurately with a resolution of 12 bits. Digital input signals can also be monitored from a dry contact or open-collector output device. Universal input 5 provides additional software selectable capability to measure analog input voltages that are 0-10 volts or input currents that are 4-20mA. A +20 VDC source is available to provide power for external transducers and is protected by an internal auto-resetable fuse. No external DC power supplies are required for your 4-20ma Loop Powered sensors.\n\nThe five digital outputs (DO) are Triac outputs for control of additional on\/off or pulsed external devices where the current does not exceed 1A at 24 VAC.\n\nThe SC100-MP controller is protected from reverse power-supply input wiring, over-voltages, transients, and other common events that can damage unprotected inputs and outputs.\n\nContinuing the commitment to OPEN Controls, Smart Controls controllers can be programmed by multiple software packages available in the industry. User-defined algorithms and functions can be programmed using VisualControl™, NodeBuilder®, LonBuilder® or other third-party LONWORKS programming tools. The application program is stored in non-volatile memory allowing the application to be retained even after loss of power. The versatile I\/O allows numerous applications to be developed and implemented with the SC100-MP.\n\nThe enclosure snaps right onto a 35mm DIN-rail for quick and easy mounting. Its spring-loaded latching mechanism makes it easy to remove.\n\nThe wide operating temperature range, -20 to 70 °C, makes the SC100-MP well-suited for many demanding applications.\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ch5\u003eGeneral\u003c\/h5\u003e\nCommunication: NATIVE BACnet, LonTalk FT\nIP Support: BACnet\/IP, LonTalk\/IP over TP\/FT-10 (Requires Router)\nTransceiver: RS-485, (termination jumper) Selectable Baud Rate: 38400 default, 19200, 9600 and FT-10 Free Topology\nMAC Address: Dip Switch Selectable\nI\/O Processor: 32-bit Microcontroller\nProcessor: Neuron FT6050 Smart Transceiver @ 80 MHz\nApplication Memory: 64 KB RAM, 1.0 MB External Serial FLASH\n\u003ch5\u003ePower\u003c\/h5\u003e\nNominal Input Voltage: 24 VAC\nInput Voltage Range: 19.2-28.8 VAC\nTypical Consumption: 1 VA\nMaximum Consumption: 1.5 VA, does not include Triac loading\nOutput Power Protection: +20V Output auto-reset fuse\n\u003ch5\u003eEnvironmental\u003c\/h5\u003e\nOperating Temperature: -20 °C to +70 °C, -4 °F to 158 °F\nStorage Temperature: -40 °C to +70 °C, -40 °F to 158 °F\nRelative Humidity: 5% to 95% (non-condensing)\n\u003ch5\u003eWarranty\u003c\/h5\u003e\nPeriod: 2 Years (Limited)\n\u003ch5\u003eInputs\u003c\/h5\u003e\nNumber: 5\nUI1-UI4\nVoltage; 0-5 Volts\nThermistor; Type 2,3 10K ohms or 20K ohms (25°C, 77°F)\nDigital; Dry Contact, TTL\nUI5 Only\nVoltage; 0-5 Volts, 0-10 Volts\nThermistor; Type 2,3 10K ohms or 20K ohms (25°C, 77°F)\nDigital; Dry Contact, TTL\nAll Inputs\nResolution: 12-bit\nAccuracy: ±1% FS (25°C, 77°F)\nProtection Circuitry: Transient Over voltage, ESD\n\u003ch5\u003eOutputs\u003c\/h5\u003e\nNumber: 5\n5 – Digital: Triac 1.0 A @ 24 VAC Internal Source\nProtection Circuitry: Transient Over-voltage, ESD\n\u003ch5\u003e+20 VDC Supply\u003c\/h5\u003e\nVoltage: +20 ± 0.5 VDC\nCurrent Continuous: 0.3 Amps Max. (20°C, 68°F)\nFused: 0.6 Amps trip, Auto-Reset (20°C, 68°F)\n\u003ch5\u003eSI-20 (SI+,SI-)\u003c\/h5\u003e\nConnection: 2-wire (15V Polarity Sensitive)\nCommunication: Serial\n\u003ch5\u003eEnclosure\u003c\/h5\u003e\nDimensions: L 105 x W 86 x H 58 mm, (4.13” x 3.39” x 2.28”)\nCover: Lexan 940, UL94-V0 rated\nBase: Noryl VO1550, UL94-V0 rated","brand":"Engenuity Systems","offers":[{"title":"Default Title","offer_id":50732414238978,"sku":"SCL1A-18","price":337.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0827\/1839\/2578\/files\/SC100-MP-1.webp?v=1792018138","url":"https:\/\/engenuity.com\/products\/sc100-mp-multi-protocol-controller","provider":"Engenuity Systems","version":"1.0","type":"link"}