PVMet-75 Weather Station w/POA

More Views

PVMet-75 Weather Station w/POA

Product Code: RNW0E-00
Model #: PVMet-75
$945.00

Made in the USA - The PVMet-75 is the most cost effecite entry level ModBus weather station, preassembled and simple to install.

Description

PVMet-75 Weather Station

Solar Panel Efficiency Monitoring

These weather stations are designed to meet the needs of renewable energy power generation, most specifically PV panels. The PVmet series use Modbus protocols, Plane of Array Irradiance sensors, and communication options for the purpose of reporting data to increase knowledge of panel performance and aid in predicting and identifying daily plant output.

The PVMet-75 is the most cost effective entry level weather station, preassembled and simple to install.

Entry Features include:

  • Adjustable Solar Irradiance Sensor for Global or Plane-of-Array Monitoring

  • 1 or 2 x Back-of-PV Panel Temp Sensor(s)

  • Ambient Air Temperature Sensor

  • Modbus RS-485 Communication

  • Sunspec Ver. 1.1 Compliant

Sensors & Options:

  • Ambient Air Temperature: Housed in a passive shield

  • Global Irradiance or Plane-of-Array Irradiance: The irradiance sensor is adjustable and can be set to provide global irradiance (when horizontal) or plane -of-array irradiance when installed to match the PV panel angle.

  • Back-of-Module Temperature: These sensors are attached to the back of the PV panel using thermal conductive adhesive tape. They provide accurate panel temperatures, an important parameter for efficiency monitoring. One sensor is shipped with each system. The PVMet-100 supports two sensors. The second may be purchased separately.

Communications:

The PVMet-75 has a single, 2-wire, half duplex, RS-485 port. Termination can be enabled or disabled using a jumper located near the RS-485 screw terminals. By default the PVMet-75 is configured to operate as a Modbus slave at address 60. The Modbus register layout is compatible with SunSpec Ver 1.1.

Installation:

The PVMet-75 ’s compact light weight design make installation quick and easy. Various mounting options are available, including a 3-foot tripod and Mono mount. The PVMet-75 is supplied with a detachable mast section that can bolt to an existing structure. All electrical connections are made using screw terminals. Standard sensors are factory installed. As a user/installer the only connections required are power and communications. Wires are provided for these functions, prewired internally to the board. No need to make internal connections on the unit.

Additional Information
Additional Information
Product Code RNW0E-00
Model # PVMet-75
Brand RainWise
Manufacturer RainWise
You may also be interested in the following product(s)